Skew bevel climax drive.   Scratchbuilt motor with ball bearings.  Cheddar gas tank and burner on a Copper silver solder boiler.   Robust gearing for powerful slow speed running.

Copper silversoldered boiler with ceramic burner.  Runs very sedate with a light load

Slip eccentric chassis 45mm gauge only. Has a new roundhouse gas tank and gas valve installed from the Fowler.  Saddletank is working for carying water with a vaccum tap valve for boiler refill when the run is complete.

Serial no22

Engine is very sedate and controlled

Smokebox door in photo was not closed all the way.

Can be regauged with a new trailing truck from Roundhouse

Scratch on one tank side as seen and cab roof hinge is bent.

Cast spoked drivers

Lining with pinstripe tape.  Can be removed.

Custom built and redesigned with a larger frame built in metal and wood. Drivetrain and axleboxes set up with ball bearings

Comes with cast figure.  Dual gauge  32/45mm

Brand new with inner box and packing

Preowned, low use Lyn.  Has the typical darkened paint as most early Accucraft smokeboxes do.  Comes with the 32mm and 45mm axles for fully regauging the model

Model was rebuilt into a PRR Mikado.  Some minor scratches from use along with the typical roof panel is loose. Sightglass was rebuilt with a larger tube.    Had RC gear but had since been cut/removed by the previous owner. Currently manual control.

I do have more photos if required.