The parts are supplied unpainted in component form and include full instructions. The specifications are as follows:

• 0-4-0 chassis based on freelance design.
• Machined brass and stainless steel laser cut parts.
• High quality geared motor and precision made steel helical gear set.
• Supplied with a MFA motor rated between 12V to 24V. This is limited to 7V - 14V when used in conjunction with a Roundhouse-Locoglyde speed controller.
• Supplied with uninsulated wheels as standard. Insulated wheels are available at an extra cost.
• Adjustable between 32mm and 45mm gauge.
• Length over center buffers: 240mm
• Buffer width: 87mm
• Frame width: 57mm
• Height: 45mm
• Distance between wheel centers: 80mm
• Weight: 1070g
• Batteries and R/C controller not included in this kit.

The parts are supplied unpainted in component form and include full instructions. The specifications are as follows:

• 0-4-0 chassis based on freelance design.
• Machined brass and stainless steel laser cut parts.
• High quality geared motor and precision made steel helical gear set.
• Supplied with a MFA motor rated between 12V to 24V. This is limited to 7V - 14V when used in conjunction with a Roundhouse-Locoglyde speed controller.
• Supplied with uninsulated wheels as standard. Insulated wheels are available at an extra cost.
• Adjustable between 32mm and 45mm gauge.
• Length over center buffers: 240mm
• Buffer width: 87mm
• Frame width: 57mm
• Height: 45mm
• Distance between wheel centers: 80mm
• Weight: 1070g
• Batteries and R/C controller not included in this kit.

Features of this Unit:-

• 100% Waterproof
• 10A motor limit
• 6.0V to 14.4V Operating voltage
• 0.025V drop at 10A
• Maximum current rating, 10A
• 1.2A BEC
• In built Directional Lighting circuit

• Length over buffers: 229.50mm
• Width: 91.50mm
• Height from railhead: 132.50mm
• Sealed 6 NiMh AA cells (7.2 volts)
• Available with sound system featuring engine sound and horn at extra cost.
• Working headlights
• 2.4GHz radio control as standard
• Smart charger
• Worm gear drive
• Chain drive to rear axle
• Regaugable between 32mm and 45mm
• 4 Axle bearings
• Removable roof
• On/off switch situated in cab
• Onboard charging port
• Glazed cab windows
• Comes with both prototypical buffers and Roundhouse centre buffers to be fitted at customer discretion.
• Available in any Standard Roundhouse Colour

• 0-4-0 outside framed chassis with two high quality geared motors and precision made steel helical gear sets.
• Dimensions are :- length 309mm, width 110mm, height 145mm, weight 3.5 kg.
• Full radio control for both speed and direction (and sound if fitted).
• Front and rear working directional headlamps.
• Rechargeable NiMh batteries (10 on loco) for excellent running time complete with fast charger for in-situ charging.
• Gauge adjustable between 32mm and 45mm gauge.
• Insulated wheels as standard.
• Fully glazed windows and removable roof to access interior.
• Available in any standard ROUNDHOUSE colour.

• • 0-6-0 outside framed chassis with high quality Buhler motor and precision made steel and bronze gear set.
  • Dimensions are :- length 275mm, width 110mm, height 150mm, weight 2.92 kg.
  • Full radio control for both speed and direction (and sound if fitted).
  • Rechargeable NiMh batteries (10 on loco) for excellent running time complete with fast charger for in-situ charging.
  • Gauge adjustable between 32mm and 45mm gauge.
  • Insulated wheels as standard.
  • Fully glazed windows and removable roof to access interior.
  • Available in any standard ROUNDHOUSE colour.
  • Available in FR grey and yellow livery (Vinyl Transfer)at extra cost.

Little John is our second diesel locomotive. It is a freelance design typical of a powerful small yard shunter. This model has been designed to be equal in performance to our steam locomotives.

Technical specifications for 'Little John'.

• 0-4-0 outside framed steel chassis.
• Long running time.
• Fitted with a Hi-Powered motor and tough nylon gear set.
• Dimensions (loading gauge) are :- length 179mm over buffers, width 76mm, height 139mm, weight 1.275Kg (with r/c).
• Full radio control - stop start and speed in both directions using our powerful and highly reliable Roundhouse 'Locoglyde' electronic speed controller (ESC).
• Powered by 8 AA NiMh rechargeable batteries for excellent running time, complete with fast charger for in-situ charging.
• 2.4Ghz r/c transmitter included.
• The wheels are adjustable between 32mm and 45mm gauge.
• Fitted as standerd with insulated wheels.
• Available in any standard ROUNDHOUSE colour.
• Choice of plain red or black/yellow chevron buffer beams.

Bulldog is another freelance design typical of a powerful small yard shunter and, though it shares the same chassis with Little John, it has a more purposeful look and features extra detail and a working head lamp. This model has been designed and built to be equal in performance to our steam models.

Technical specifications for ‘Bulldog’.

•  Weight 1.4kg.
•  Long running time.
•  0-4-0 outside framed steel chassis.
•  Dimensions: Length 179mm (over Coupling), Width 80mm, Height 139mm.
•  Fitted with a High-Powered Motor and tough Nylon Gear set.
•  Working head lamp..
•  Full radio control - Stop, Start and Speed in both directions using our powerful and highly reliable Roundhouse 'LocoGlyde' Electronic Speed Controller (ESC).
•  Powered by 6 AA NiMh rechargeable batteries for excellent running time complete with fast charger for in-situ charging.
•  Gauge adjustable between 32mm and 45mm gauge.
•  Insulated wheels fitted as standard.
•  Buffer Beams - Choice of Plain Red or Yellow/Black Chevrons.
•  Available in any standard ROUNDHOUSE colour.